White Spots and Scratches: Diagnose the Surface Before Naming the Defect
A white spot on a GOES sheet is a location to…
Baca artikel lengkapPUSTAKAReferensi rekayasa
Pengujian, standar & spesifikasi
Artikel rekayasa praktis untuk pemilihan, desain, dan produksi inti transformator.
65 artikel
Insulation Coating Is a Measured Function, Not a Yes-or-No Feature
"Both sides coated" leaves the most useful co…
Baca artikel lengkapSurface Rust on GOES: What Should Decide the Disposition?
Colour is a poor acceptance criterion for a r…
Baca artikel lengkapWhy Restacking the Same Laminations Can Change Performance
Keep every lamination. Change the assembly. T…
Baca artikel lengkapCore Rework: Restoring Dimensions Without Losing Functional Control
The instruction "grind until it fits" should …
Baca artikel lengkapRoot Cause Analysis: A Replacement Core Is Not an Explanation
Consider a passing replacement core and a cor…
Baca artikel lengkapWhen All Factory Checks Passed but the Customer Still Has a Problem
"It passed here" and "it does not work here" …
Baca artikel lengkapA Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
Baca artikel lengkapWhat In-House Core Testing Actually Changes
The value of a core test station is measured …
Baca artikel lengkapSame CRGO Grade, Different Coil: Managing the Variation
A grade designation defines requirements. It …
Baca artikel lengkapWhy Purchasing and Engineering Disagree About a Core Supplier
Purchasing says the supplier delivered on tim…
Baca artikel lengkapA Stricter Core Specification Is Not Always a Better Specification
Before tightening a specification, name the f…
Baca artikel lengkapTidak ada artikel yang cocok. Coba kata kunci yang lebih umum.
Catatan referensi rekayasa
Catatan referensi singkat melengkapi artikel lengkap yang diterbitkan.