White Spots and Scratches: Diagnose the Surface Before Naming the Defect
A white spot on a GOES sheet is a location to…
Leggi l'articolo completoBIBLIOTECARisorse tecniche
Collaudi, norme e specifiche
Articoli tecnici pratici per la selezione, la progettazione e la produzione di nuclei per trasformatori.
65 articoli
Insulation Coating Is a Measured Function, Not a Yes-or-No Feature
"Both sides coated" leaves the most useful co…
Leggi l'articolo completoSurface Rust on GOES: What Should Decide the Disposition?
Colour is a poor acceptance criterion for a r…
Leggi l'articolo completoWhy Restacking the Same Laminations Can Change Performance
Keep every lamination. Change the assembly. T…
Leggi l'articolo completoCore Rework: Restoring Dimensions Without Losing Functional Control
The instruction "grind until it fits" should …
Leggi l'articolo completoRoot Cause Analysis: A Replacement Core Is Not an Explanation
Consider a passing replacement core and a cor…
Leggi l'articolo completoWhen All Factory Checks Passed but the Customer Still Has a Problem
"It passed here" and "it does not work here" …
Leggi l'articolo completoA Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
Leggi l'articolo completoWhat In-House Core Testing Actually Changes
The value of a core test station is measured …
Leggi l'articolo completoSame CRGO Grade, Different Coil: Managing the Variation
A grade designation defines requirements. It …
Leggi l'articolo completoWhy Purchasing and Engineering Disagree About a Core Supplier
Purchasing says the supplier delivered on tim…
Leggi l'articolo completoA Stricter Core Specification Is Not Always a Better Specification
Before tightening a specification, name the f…
Leggi l'articolo completoNessun articolo corrispondente. Provate una parola chiave più generale.
Note tecniche di riferimento
Brevi note di riferimento completano gli articoli pubblicati integralmente.