Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
Baca artikel lengkapPUSTAKAReferensi rekayasa
Pengujian, standar & spesifikasi
Artikel rekayasa praktis untuk pemilihan, desain, dan produksi inti transformator.
65 artikel
A No-Load Loss Failure at Transformer FAT
FAT has found excessive no-load loss. The inv…
Baca artikel lengkapWhat 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
Baca artikel lengkapHigh Measured Loss: Start with the Measurement Boundary
Before ordering a different CRGO grade, repea…
Baca artikel lengkapNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
Baca artikel lengkapOne Joint-Gap Reading Cannot Represent a Whole Stack
The inspection sheet shows one joint-gap valu…
Baca artikel lengkapA Factory Pass Does Not Freeze the Core for Transport
A magnetic test report records a condition at…
Baca artikel lengkapWhen a Lift Changes the Test Result
A core passes before lifting and reads differ…
Baca artikel lengkapWhat a First Trial Order Should Prove
Do not spend the first trial order proving on…
Baca artikel lengkapA Supplier Audit Should Follow One Core Backwards
Skip the second tour of the cutting line. Cho…
Baca artikel lengkapWhat Should the Core Supplier Actually Guarantee?
"We guarantee the material" and "we guarantee…
Baca artikel lengkapTransformer Core Procurement: From Steel Mass to Performance
Your purchase order counts kilograms. Your tr…
Baca artikel lengkapTidak ada artikel yang cocok. Coba kata kunci yang lebih umum.
Catatan referensi rekayasa
Catatan referensi singkat melengkapi artikel lengkap yang diterbitkan.