White Spots and Scratches: Diagnose the Surface Before Naming the Defect
A white spot on a GOES sheet is a location to…
Lire l’article completBIBLIOTHÈQUERessources techniques
Essais, normes et spécifications
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
65 articles
Insulation Coating Is a Measured Function, Not a Yes-or-No Feature
"Both sides coated" leaves the most useful co…
Lire l’article completSurface Rust on GOES: What Should Decide the Disposition?
Colour is a poor acceptance criterion for a r…
Lire l’article completWhy Restacking the Same Laminations Can Change Performance
Keep every lamination. Change the assembly. T…
Lire l’article completCore Rework: Restoring Dimensions Without Losing Functional Control
The instruction "grind until it fits" should …
Lire l’article completRoot Cause Analysis: A Replacement Core Is Not an Explanation
Consider a passing replacement core and a cor…
Lire l’article completWhen All Factory Checks Passed but the Customer Still Has a Problem
"It passed here" and "it does not work here" …
Lire l’article completA Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
Lire l’article completWhat In-House Core Testing Actually Changes
The value of a core test station is measured …
Lire l’article completSame CRGO Grade, Different Coil: Managing the Variation
A grade designation defines requirements. It …
Lire l’article completWhy Purchasing and Engineering Disagree About a Core Supplier
Purchasing says the supplier delivered on tim…
Lire l’article completA Stricter Core Specification Is Not Always a Better Specification
Before tightening a specification, name the f…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.