Where Should the Next Dollar of Loss-Reduction Budget Go?
The next dollar should go to the active limit…
Lire l’article completBIBLIOTHÈQUERessources techniques
Conception des noyaux et performances magnétiques
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
65 articles
Why a Firm Core Quotation Starts with the Drawing
Weight and grade can support an estimate. The…
Lire l’article completA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
Lire l’article completTransformer Noise: Separate the Source from the Transmission Path
A louder transformer does not tell you which …
Lire l’article completThe Joint Region: A Small Volume with a Different Magnetic Job
Most of the steel follows a relatively orderl…
Lire l’article completWhy Large-Core Loss Predictions Need More Than a Size Multiplier
A larger core does not automatically have a w…
Lire l’article completWhy Calculated Core Loss and Measured Loss Do Not Match Exactly
Before adjusting the building factor, check w…
Lire l’article completTransporting a Large Core Is an Engineering Decision
The cheapest route can require the one handli…
Lire l’article completThe Hidden Constraint in a Large Complete Assembled Core
Where is the large core being held straight? …
Lire l’article completAn 18-Tonne Core Is Not a One-Tonne Core Enlarged
An 18-tonne core can meet every local measure…
Lire l’article completWhy the Highest GOES Grade May Not Be the Best Transformer Design
Suppose the lowest-loss GOES is approved. Wha…
Lire l’article completB800: A Useful Material Indicator, Not an Operating Prescription
B800 is a point on a characteristic. It is no…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.