Where Should the Next Dollar of Loss-Reduction Budget Go?
The next dollar should go to the active limit…
Makalenin tamamını okuKÜTÜPHANEMühendislik kaynakları
Nüve tasarımı ve manyetik performans
Transformatör nüvesi seçimi, tasarımı ve üretimi için uygulamaya dönük mühendislik makaleleri.
65 makale
Why a Firm Core Quotation Starts with the Drawing
Weight and grade can support an estimate. The…
Makalenin tamamını okuA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
Makalenin tamamını okuTransformer Noise: Separate the Source from the Transmission Path
A louder transformer does not tell you which …
Makalenin tamamını okuThe Joint Region: A Small Volume with a Different Magnetic Job
Most of the steel follows a relatively orderl…
Makalenin tamamını okuWhy Large-Core Loss Predictions Need More Than a Size Multiplier
A larger core does not automatically have a w…
Makalenin tamamını okuWhy Calculated Core Loss and Measured Loss Do Not Match Exactly
Before adjusting the building factor, check w…
Makalenin tamamını okuTransporting a Large Core Is an Engineering Decision
The cheapest route can require the one handli…
Makalenin tamamını okuThe Hidden Constraint in a Large Complete Assembled Core
Where is the large core being held straight? …
Makalenin tamamını okuAn 18-Tonne Core Is Not a One-Tonne Core Enlarged
An 18-tonne core can meet every local measure…
Makalenin tamamını okuWhy the Highest GOES Grade May Not Be the Best Transformer Design
Suppose the lowest-loss GOES is approved. Wha…
Makalenin tamamını okuB800: A Useful Material Indicator, Not an Operating Prescription
B800 is a point on a characteristic. It is no…
Makalenin tamamını okuEşleşen makale bulunamadı. Daha genel bir anahtar kelime deneyin.