Where Should the Next Dollar of Loss-Reduction Budget Go?
The next dollar should go to the active limit…
원문 읽기자료엔지니어링 자료
철심 설계 및 자기 특성
변압기 철심 설계와 자기 특성에 참고할 수 있는 기술 글을 모았습니다.
65 건
Why a Firm Core Quotation Starts with the Drawing
Weight and grade can support an estimate. The…
원문 읽기A Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
원문 읽기Transformer Noise: Separate the Source from the Transmission Path
A louder transformer does not tell you which …
원문 읽기The Joint Region: A Small Volume with a Different Magnetic Job
Most of the steel follows a relatively orderl…
원문 읽기Why Large-Core Loss Predictions Need More Than a Size Multiplier
A larger core does not automatically have a w…
원문 읽기Why Calculated Core Loss and Measured Loss Do Not Match Exactly
Before adjusting the building factor, check w…
원문 읽기Transporting a Large Core Is an Engineering Decision
The cheapest route can require the one handli…
원문 읽기The Hidden Constraint in a Large Complete Assembled Core
Where is the large core being held straight? …
원문 읽기An 18-Tonne Core Is Not a One-Tonne Core Enlarged
An 18-tonne core can meet every local measure…
원문 읽기Why the Highest GOES Grade May Not Be the Best Transformer Design
Suppose the lowest-loss GOES is approved. Wha…
원문 읽기B800: A Useful Material Indicator, Not an Operating Prescription
B800 is a point on a characteristic. It is no…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.