Where Should the Next Dollar of Loss-Reduction Budget Go?
The next dollar should go to the active limit…
Vollständigen Artikel lesenFACHBIBLIOTHEKTechnisches Wissen
Kernauslegung & magnetische Eigenschaften
Praxisbezogene Fachartikel zur Auswahl, Auslegung und Fertigung von Transformatorenkernen.
65 Artikel
Why a Firm Core Quotation Starts with the Drawing
Weight and grade can support an estimate. The…
Vollständigen Artikel lesenA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
Vollständigen Artikel lesenTransformer Noise: Separate the Source from the Transmission Path
A louder transformer does not tell you which …
Vollständigen Artikel lesenThe Joint Region: A Small Volume with a Different Magnetic Job
Most of the steel follows a relatively orderl…
Vollständigen Artikel lesenWhy Large-Core Loss Predictions Need More Than a Size Multiplier
A larger core does not automatically have a w…
Vollständigen Artikel lesenWhy Calculated Core Loss and Measured Loss Do Not Match Exactly
Before adjusting the building factor, check w…
Vollständigen Artikel lesenTransporting a Large Core Is an Engineering Decision
The cheapest route can require the one handli…
Vollständigen Artikel lesenThe Hidden Constraint in a Large Complete Assembled Core
Where is the large core being held straight? …
Vollständigen Artikel lesenAn 18-Tonne Core Is Not a One-Tonne Core Enlarged
An 18-tonne core can meet every local measure…
Vollständigen Artikel lesenWhy the Highest GOES Grade May Not Be the Best Transformer Design
Suppose the lowest-loss GOES is approved. Wha…
Vollständigen Artikel lesenB800: A Useful Material Indicator, Not an Operating Prescription
B800 is a point on a characteristic. It is no…
Vollständigen Artikel lesenKeine passenden Artikel. Versuchen Sie einen allgemeineren Suchbegriff.