Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
Makalenin tamamını okuKÜTÜPHANEMühendislik kaynakları
Nüve tasarımı ve manyetik performans
Transformatör nüvesi seçimi, tasarımı ve üretimi için uygulamaya dönük mühendislik makaleleri.
65 makale
What 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
Makalenin tamamını okuNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
Makalenin tamamını okuThe Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
Makalenin tamamını okuLamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
Makalenin tamamını okuMore Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
Makalenin tamamını okuThe Smallest Step-Lap Gap Is Not the Whole Objective
"Close the gap as much as possible" is not a …
Makalenin tamamını okuClamping Pressure Is Not a More-Is-Better Setting
The torque wrench clicks. The core is still n…
Makalenin tamamını okuMechanical Stress After the Core Is Built
The chemistry has not changed. The magnetic r…
Makalenin tamamını okuTransformer Core Drawings and Manufacturing Recipe Control
Look at two cores made to the same drawing. T…
Makalenin tamamını okuTransformer Core Building Factor: Define the Baseline First
What does a building factor of 1.15 actually …
Makalenin tamamını okuTwo domain-refined GOES sheets at 1.7 T, 50 Hz:
Compare 0.20 mm and 0.23 mm domain-refined GO…
Makalenin tamamını okuEşleşen makale bulunamadı. Daha genel bir anahtar kelime deneyin.