Drying Endpoints for Active Parts: Time Alone Is Not Acceptance
A drying endpoint should indicate that the ap…
Ler artigo completoBIBLIOTECARecursos de engenharia
Biblioteca técnica
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
1,317 artigos
Vacuum Drying versus Vapour-Phase Drying: What the Buyer Should Verify
Vacuum drying and vapour-phase drying are pro…
Ler artigo completoAramid Insulation in Transformers: Define the Actual High-Temperature Scope
Aramid insulation can be part of a high-tempe…
Ler artigo completoThermally Upgraded Paper: Ratings Depend on the Insulation System
Thermally upgraded paper is a specified insul…
Ler artigo completoDegree of Polymerization: What a Paper Sample Can Represent
When measured by IEC 60450, the reported quan…
Ler artigo completoTransformer Paper Moisture: Why Oil Samples Are Only Part of the Evidence
An oil sample measures the liquid at a partic…
Ler artigo completoTransformer Liquid Environmental Claims: Define Test Method and Conditions
Terms such as biodegradable, biobased, non-ha…
Ler artigo completoEster-Filled Transformers: Interpreting Dissolved-Gas Results with the Right Basis
Dissolved-gas analysis must be interpreted fo…
Ler artigo completoRetrofill Projects: Why Replacing the Liquid Is a Design Review
Retrofilling replaces the insulating liquid i…
Ler artigo completoTransformer Oil Compatibility when Topping Up
A top-up introduces a second material into an…
Ler artigo completoTransformer Fluid Fire Point: Liquid Property versus Installation Approval
A fluid's fire point is a property measured u…
Ler artigo completoInhibited and Uninhibited Mineral Oil: Specify the Maintenance Philosophy
The distinction between inhibited and uninhib…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.
Notas técnicas de referência
Notas de consulta rápida complementam os artigos publicados na íntegra.