Cooler Fouling Allowances: Discuss Maintenance Assumptions Explicitly
A cooler rating usually represents defined su…
Ler artigo completoBIBLIOTECARecursos de engenharia
Biblioteca técnica
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
1,317 artigos
Natural Cooling inside Enclosures: Why Open-Air Ratings Are Insufficient
Natural cooling relies on an available path f…
Ler artigo completoTransformer Water Cooling: Heat-Exchanger Supply Interfaces
A water-cooled transformer depends on both it…
Ler artigo completoDirected Oil Flow: What the Thermal Model Must Demonstrate
Directed oil flow is intended to route pumped…
Ler artigo completoTransformer Fan Redundancy: Count Cooling Groups, Not Just Fans
Redundancy is the ability to retain a defined…
Ler artigo completoOil Pump Duty: Flow, Head and Transformer Hydraulic Resistance
An oil pump does not deliver one fixed flow r…
Ler artigo completoRadiator Capacity in Transformer Specifications: Define Ambient and Oil Conditions
A radiator heat-rejection figure is meaningfu…
Ler artigo completoTransformer Insulation Ageing: Thermal, Moisture and Oxygen Effects
Transformer insulation ageing is influenced b…
Ler artigo completoONAN, ONAF, OFAF and ODAF: Read the Cooling Circuit, Not Just the Letters
Transformer cooling codes describe the coolin…
Ler artigo completoPressboard Compression and Winding Clamping: A Time-Dependent Interface
A pressboard support stack does not behave li…
Ler artigo completoOil Impregnation of Solid Insulation: Inputs beyond Vacuum Level
Impregnation aims to establish the intended l…
Ler artigo completoExposure Time after Drying: Humidity and Temperature Both Matter
A dried active part can absorb moisture again…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.
Notas técnicas de referência
Notas de consulta rápida complementam os artigos publicados na íntegra.