Drying Endpoints for Active Parts: Time Alone Is Not Acceptance
A drying endpoint should indicate that the ap…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Vacuum Drying versus Vapour-Phase Drying: What the Buyer Should Verify
Vacuum drying and vapour-phase drying are pro…
원문 읽기Aramid Insulation in Transformers: Define the Actual High-Temperature Scope
Aramid insulation can be part of a high-tempe…
원문 읽기Thermally Upgraded Paper: Ratings Depend on the Insulation System
Thermally upgraded paper is a specified insul…
원문 읽기Degree of Polymerization: What a Paper Sample Can Represent
When measured by IEC 60450, the reported quan…
원문 읽기Transformer Paper Moisture: Why Oil Samples Are Only Part of the Evidence
An oil sample measures the liquid at a partic…
원문 읽기Transformer Liquid Environmental Claims: Define Test Method and Conditions
Terms such as biodegradable, biobased, non-ha…
원문 읽기Ester-Filled Transformers: Interpreting Dissolved-Gas Results with the Right Basis
Dissolved-gas analysis must be interpreted fo…
원문 읽기Retrofill Projects: Why Replacing the Liquid Is a Design Review
Retrofilling replaces the insulating liquid i…
원문 읽기Transformer Oil Compatibility when Topping Up
A top-up introduces a second material into an…
원문 읽기Transformer Fluid Fire Point: Liquid Property versus Installation Approval
A fluid's fire point is a property measured u…
원문 읽기Inhibited and Uninhibited Mineral Oil: Specify the Maintenance Philosophy
The distinction between inhibited and uninhib…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.