The Cost of Optimizing Only for Minimum No-Load Loss
The lowest no-load-loss design is not necessa…
원문 읽기자료엔지니어링 자료
철심 설계 및 자기 특성
변압기 철심 설계와 자기 특성에 참고할 수 있는 기술 글을 모았습니다.
65 건
Core-Loss Margin: Name the Uncertainty Before Adding the Allowance
What does the loss margin cover that the buil…
원문 읽기No-Load Loss and Exciting Current Measure Different Things
Watts describe energy dissipation. RMS ampere…
원문 읽기Why an Approved 110% Excitation Point Can Be So Revealing
Suppose two cores agree near the reference po…
원문 읽기Over-Fluxing Is a V/f and Magnetic-Circuit Question
Rated voltage does not establish rated flux w…
원문 읽기Stacking Factor: The Area Error That Changes the Operating Point
A stacking-factor assumption enters the magne…
원문 읽기Core Diameter and Effective Area Are Not Interchangeable
Which diameter is on the drawing: the physica…
원문 읽기Limb Centre Distance: Small Errors, Different Assembly Consequences
Two centre-distance deviations of the same ma…
원문 읽기Window Size Means Usable Winding Clearance, Not Just Two Dimensions
A winding can fit the nominal window and stil…
원문 읽기Large-Core Dimensional Chains: Why Every Part Can Pass and the Assembly Still Miss
Every dimension on the inspection sheet is gr…
원문 읽기Standing and Flat Core Handling Need Different Mechanical Assumptions
A stack that is stable on a building table ha…
원문 읽기Which Core Tolerances Are Worth Tightening?
Tolerance should follow sensitivity. A critic…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.