Dry-Type Core Cooling beneath a Decorative Enclosure
A dry-type enclosure changes the connected ai…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Core-Duct Spacer Positions: Map Blockage and Heat Paths
Spacer positions determine core-duct supply, …
원문 읽기Temperature-Dependent Core Loss: Check the Magnetic–Thermal Loop
Temperature-dependent core loss couples the m…
원문 읽기Sustained Overexcitation: Locate Transformer Core Heating
Sustained overexcitation changes local magnet…
원문 읽기Winter Low-Load Transformers: Map Oil Stratification around the Core
Winter low-load operation still heats an ener…
원문 읽기Identify Thermal Time Constants of Large Transformer Core Packets
A large core packet's thermal response follow…
원문 읽기Oil or Air in Core Gaps: Use the Actual Thermal Boundary
Core-gap cooling depends on actual liquid fil…
원문 읽기Hidden Core Hot Spots beneath Transformer Support Blocks
Core support blocks replace an exposed oil-co…
원문 읽기No-Load Core Temperatures: Explain Limb–Yoke Differences
Limb–yoke temperature differences can reveal …
원문 읽기Core Oil-Duct Flow Reversal beside a Hot Transformer Winding
Core-duct flow follows the pressure and tempe…
원문 읽기Core-to-Coil Radiation in an Open Dry-Type Transformer
Core radiation exchanges heat with the windin…
원문 읽기Heat Spreading within Laminations near Transformer Core Joints
Joint temperature patterns reflect local magn…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.