Sparse GOES Loss Curves: Bound the Core-Design Search
Sparse GOES curves define a bounded design se…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Transformer Core Optimization for Multiple Operating Frequencies
A multi-frequency core must satisfy the volta…
원문 읽기Worst-Case Transformer Core Flux: Combine the Actual Bounds
Worst-case core flux comes from voltage, freq…
원문 읽기Jointly Optimize Transformer Limb and Yoke Cross-Sections
Joint limb-and-yoke optimization identifies w…
원문 읽기Transformer Core Window Ratio: Define the Coil-Fit Region
A 600 mm × 200 mm window and a 400 mm × 300 m…
원문 읽기Optimize Transformer Core Steps with Available Strip Widths
Available strip widths turn a stepped-core op…
원문 읽기Integer Turns in Transformer Core Optimization: Recheck the Pair
A continuous optimizer may propose 101.4 prim…
원문 읽기Validate Transformer Shunts at Coupon, Panel or Full-Unit Scale
Choose the shunt validation scale that preser…
원문 읽기Isolated Magnetic-Shunt Packs: Map the Grounding Connections
An isolated magnetic-shunt pack needs an expl…
원문 읽기Prototype Transformer Shunts: Measure Local Heat and Total Loss
A prototype shunt trial should measure local …
원문 읽기Retrofitting Transformer Shunts: Recheck the Oil-Flow Paths
A shunt retrofit changes magnetic loss and th…
원문 읽기Transient Forces on Tank-Mounted Transformer Magnetic Shunts
Tank-mounted shunts transmit transient electr…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.