Drying Endpoints for Active Parts: Time Alone Is Not Acceptance
A drying endpoint should indicate that the ap…
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
1,317 articles
Vacuum Drying versus Vapour-Phase Drying: What the Buyer Should Verify
Vacuum drying and vapour-phase drying are pro…
Lire l’article completAramid Insulation in Transformers: Define the Actual High-Temperature Scope
Aramid insulation can be part of a high-tempe…
Lire l’article completThermally Upgraded Paper: Ratings Depend on the Insulation System
Thermally upgraded paper is a specified insul…
Lire l’article completDegree of Polymerization: What a Paper Sample Can Represent
When measured by IEC 60450, the reported quan…
Lire l’article completTransformer Paper Moisture: Why Oil Samples Are Only Part of the Evidence
An oil sample measures the liquid at a partic…
Lire l’article completTransformer Liquid Environmental Claims: Define Test Method and Conditions
Terms such as biodegradable, biobased, non-ha…
Lire l’article completEster-Filled Transformers: Interpreting Dissolved-Gas Results with the Right Basis
Dissolved-gas analysis must be interpreted fo…
Lire l’article completRetrofill Projects: Why Replacing the Liquid Is a Design Review
Retrofilling replaces the insulating liquid i…
Lire l’article completTransformer Oil Compatibility when Topping Up
A top-up introduces a second material into an…
Lire l’article completTransformer Fluid Fire Point: Liquid Property versus Installation Approval
A fluid's fire point is a property measured u…
Lire l’article completInhibited and Uninhibited Mineral Oil: Specify the Maintenance Philosophy
The distinction between inhibited and uninhib…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.
Fiches de référence techniques
Des fiches de référence synthétiques complètent les articles publiés dans leur intégralité.