Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
Read full articleLIBRARYEngineering resources
Technical Library
Practical engineering articles for transformer-core selection, design and production.
1,317 articles
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
Read full articleCathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
Read full articleTransformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
Read full articleTransformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
Read full articlePaint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
Read full articlePainting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
Read full articleOil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
Read full articleZinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
Read full articleHoliday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
Read full articleInternal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
Read full articleDry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
Read full articleNo matching articles. Try a broader keyword.
Engineering reference notes
Short reference notes complement the full published articles.