Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
원문 읽기Cathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
원문 읽기Transformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
원문 읽기Transformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
원문 읽기Paint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
원문 읽기Painting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
원문 읽기Oil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
원문 읽기Zinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
원문 읽기Holiday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
원문 읽기Internal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
원문 읽기Dry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.