Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
記事の原文を読む資料技術情報
技術資料
変圧器用鉄心の選定、設計、製造に役立つ技術記事をまとめています。
1,317 件の記事
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
記事の原文を読むCathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
記事の原文を読むTransformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
記事の原文を読むTransformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
記事の原文を読むPaint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
記事の原文を読むPainting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
記事の原文を読むOil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
記事の原文を読むZinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
記事の原文を読むHoliday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
記事の原文を読むInternal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
記事の原文を読むDry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
記事の原文を読む該当する記事が見つかりませんでした。より一般的なキーワードで検索してください。
技術ノート
公開記事を補足する短い技術ノートです。