Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
Leggi l'articolo completoBIBLIOTECARisorse tecniche
Biblioteca tecnica
Articoli tecnici pratici per la selezione, la progettazione e la produzione di nuclei per trasformatori.
1,317 articoli
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
Leggi l'articolo completoCathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
Leggi l'articolo completoTransformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
Leggi l'articolo completoTransformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
Leggi l'articolo completoPaint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
Leggi l'articolo completoPainting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
Leggi l'articolo completoOil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
Leggi l'articolo completoZinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
Leggi l'articolo completoHoliday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
Leggi l'articolo completoInternal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
Leggi l'articolo completoDry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
Leggi l'articolo completoNessun articolo corrispondente. Provate una parola chiave più generale.
Note tecniche di riferimento
Brevi note di riferimento completano gli articoli pubblicati integralmente.