Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
1,317 articles
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
Lire l’article completCathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
Lire l’article completTransformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
Lire l’article completTransformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
Lire l’article completPaint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
Lire l’article completPainting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
Lire l’article completOil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
Lire l’article completZinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
Lire l’article completHoliday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
Lire l’article completInternal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
Lire l’article completDry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.
Fiches de référence techniques
Des fiches de référence synthétiques complètent les articles publiés dans leur intégralité.