Pull-Off Adhesion on Thin Transformer Tank Panels
A pull-off number needs its failure mode and …
Ler artigo completoBIBLIOTECARecursos de engenharia
Biblioteca técnica
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
1,317 artigos
Remove Transport Wax before Transformer Tank Paint Repair
A repair can hide a contaminated surface whil…
Ler artigo completoCathodic Disbondment on Buried Transformer Ancillary Steelwork
Cathodic disbondment applies to a defined pro…
Ler artigo completoTransformer Tank Paint: Chalking, UV Weathering and Protection
A weathered appearance and a failed protectiv…
Ler artigo completoTransformer Tank Colour and Solar Heat: Use the Relevant Spectrum
Two finishes with similar visible colour need…
Ler artigo completoPaint Damage around Transformer Radiator Flanges
A flange coating can be intact before assembl…
Ler artigo completoPainting Stainless Transformer Tanks: Control Cross-Contamination
A stainless surface needs a controlled prepar…
Ler artigo completoOil-Aging Tests for Transformer Tank Coatings: Film and Liquid
A coating can look intact while the liquid ha…
Ler artigo completoZinc-Rich Primer at Transformer Tank Bonding Contacts
A conductive pigment does not establish the c…
Ler artigo completoHoliday Detection on Internal Transformer Tank Coatings
A holiday test must be compatible with the co…
Ler artigo completoInternal Paint Cure Before Transformer Oil Contact
A surface can be dry to touch while its oil-c…
Ler artigo completoDry-Film Thickness on Corrugated Transformer Tank Walls
Corrugated walls need a geometric measurement…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.
Notas técnicas de referência
Notas de consulta rápida complementam os artigos publicados na íntegra.