Net Port Power Can Hide Autotransformer Internal Current
Two incoming port powers can feed one outgoin…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Autotransformer Fault Duty: Compare Single-Source Cases
A lower total fault current at a bus does not…
원문 읽기Separate Conductive and Magnetic Zero-Sequence Paths in an Autotransformer
A shared conductive path changes the sequence…
원문 읽기Model Autotransformer Neutral Potential through the Actual Grounding Network
A common neutral connects more than one volta…
원문 읽기Autotransformer Series Voltage: Separate Section and Ground Duty
A relatively small voltage across the series …
원문 읽기Convert Autotransformer Impedance without Losing the Ohmic Value
A base change alters a per-unit number. It sh…
원문 읽기Autotransformer Tap Location: Derive the Connected Turns
A tap's physical proximity to neutral suggest…
원문 읽기Equal Tap Turns Can Produce Unequal Autotransformer Ratio Steps
When a tapped quantity appears in a ratio den…
원문 읽기Add the Tertiary before Drawing the Autotransformer Load Boundary
A tertiary changes the ampere-turn balance. R…
원문 읽기Autotransformer Common-Winding Current: Use Signed Phasors
The common winding carries a branch-current d…
원문 읽기Give Different Shell-Form Coil Groups Different Thermal Nodes
One average winding node can reproduce total …
원문 읽기Separate Autotransformer Through-Power from Winding Duty
Terminal MVA is not the same quantity as the …
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.