A Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
Leggi l'articolo completoBIBLIOTECARisorse tecniche
Taglio, impilamento e assemblaggio
Articoli tecnici pratici per la selezione, la progettazione e la produzione di nuclei per trasformatori.
100 articoli
What In-House Core Testing Actually Changes
The value of a core test station is measured …
Leggi l'articolo completoA Lower Scrap Rate Does Not Automatically Mean a Better Core Factory
Before comparing scrap percentages, ask what …
Leggi l'articolo completoMaterial Utilization Cannot Override the Magnetic Direction
The nesting software may find a better fit by…
Leggi l'articolo completoMixed Laminations: The Risk Is Not Always Visible in the Stack
A packet can look correct and still contain t…
Leggi l'articolo completoMaterial Traceability Must Survive the Split and the Merge
The coil number is known. Can you still ident…
Leggi l'articolo completoShort Core Lead Time: Which Clock Has Actually Been Reduced?
Which part of the promised lead time is short…
Leggi l'articolo completoWhich Core Tolerances Are Worth Tightening?
Tolerance should follow sensitivity. A critic…
Leggi l'articolo completoCore Cost Reduction: Remove Waste Before Moving the Design Limit
A lower core purchase price is not necessaril…
Leggi l'articolo completoWhy an Excellent First Sample Can Be a Poor Production Predictor
The first sample may have passed through a pr…
Leggi l'articolo completoRepeatability: What the Best Test Result Cannot Tell You
Ask for the sequence, not the record result. …
Leggi l'articolo completoA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
Leggi l'articolo completoNessun articolo corrispondente. Provate una parola chiave più generale.
Note tecniche di riferimento
Brevi note di riferimento completano gli articoli pubblicati integralmente.