A Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
Lire l’article completBIBLIOTHÈQUERessources techniques
Découpe, empilage et assemblage
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
100 articles
What In-House Core Testing Actually Changes
The value of a core test station is measured …
Lire l’article completA Lower Scrap Rate Does Not Automatically Mean a Better Core Factory
Before comparing scrap percentages, ask what …
Lire l’article completMaterial Utilization Cannot Override the Magnetic Direction
The nesting software may find a better fit by…
Lire l’article completMixed Laminations: The Risk Is Not Always Visible in the Stack
A packet can look correct and still contain t…
Lire l’article completMaterial Traceability Must Survive the Split and the Merge
The coil number is known. Can you still ident…
Lire l’article completShort Core Lead Time: Which Clock Has Actually Been Reduced?
Which part of the promised lead time is short…
Lire l’article completWhich Core Tolerances Are Worth Tightening?
Tolerance should follow sensitivity. A critic…
Lire l’article completCore Cost Reduction: Remove Waste Before Moving the Design Limit
A lower core purchase price is not necessaril…
Lire l’article completWhy an Excellent First Sample Can Be a Poor Production Predictor
The first sample may have passed through a pr…
Lire l’article completRepeatability: What the Best Test Result Cannot Tell You
Ask for the sequence, not the record result. …
Lire l’article completA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.