Low-Flux Testing: Useful Evidence with a Different Boundary
A low-voltage diagnostic result should not be…
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
324 articles
Why an Approved 110% Excitation Point Can Be So Revealing
Suppose two cores agree near the reference po…
Lire l’article completOver-Fluxing Is a V/f and Magnetic-Circuit Question
Rated voltage does not establish rated flux w…
Lire l’article completStacking Factor: The Area Error That Changes the Operating Point
A stacking-factor assumption enters the magne…
Lire l’article completCore Diameter and Effective Area Are Not Interchangeable
Which diameter is on the drawing: the physica…
Lire l’article completLimb Centre Distance: Small Errors, Different Assembly Consequences
Two centre-distance deviations of the same ma…
Lire l’article completWindow Size Means Usable Winding Clearance, Not Just Two Dimensions
A winding can fit the nominal window and stil…
Lire l’article completLarge-Core Dimensional Chains: Why Every Part Can Pass and the Assembly Still Miss
Every dimension on the inspection sheet is gr…
Lire l’article completFour Quality Decisions That Should Not Be Collapsed into One
A core can be cosmetically acceptable, dimens…
Lire l’article completWhy a Visually Perfect Core Still Needs Magnetic Evaluation
Would a photograph of a core tell you which o…
Lire l’article completWhite Spots and Scratches: Diagnose the Surface Before Naming the Defect
A white spot on a GOES sheet is a location to…
Lire l’article completInsulation Coating Is a Measured Function, Not a Yes-or-No Feature
"Both sides coated" leaves the most useful co…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.