Core Topology and Ground-Fault Studies: When Magnetic Detail Is Needed
Magnetic detail is needed in a ground-fault s…
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
324 articles
Delta Windings and Triplen Flux: Separate Electrical and Magnetic Paths
A delta winding provides an electrical circui…
Lire l’article completUnbalanced Phase Voltages: Comparing Limb Flux Waveforms
Compare limb flux under unbalanced voltage by…
Lire l’article completZero-Sequence Core Models: Tank Representation Is a Boundary Choice
Representing a transformer tank as a magnetic…
Lire l’article completFive-Limb Core Zero-Sequence Behaviour: Do Not Copy Three-Limb Assumptions
A five-limb core provides outer iron return p…
Lire l’article completZero-Sequence Flux in a Three-Limb Core: Where Can It Return?
Zero-sequence flux in a three-limb core canno…
Lire l’article completMagnetic Shunts in Special Transformers: What They Change
A magnetic shunt deliberately changes a trans…
Lire l’article completSplit Cores and Cut Cores: Define Reopening Requirements
A split core or cut core must be specified by…
Lire l’article completToroidal Utility-Frequency Transformers: Advantages and Assembly Constraints
A toroidal core offers a closed magnetic path…
Lire l’article completRectangular Core Windows for Racetrack Windings
A rectangular core window can suit a racetrac…
Lire l’article completStepped versus Circular Core Sections: Magnetic and Winding Interfaces
A stepped core section is an approximation to…
Lire l’article completYoke Cross-Section Selection: Flux Distribution before Geometric Symmetry
Yoke cross-section should be selected from th…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.