Low-Flux Testing: Useful Evidence with a Different Boundary
A low-voltage diagnostic result should not be…
阅读全文技术资料库工程技术资料
技术资料
面向变压器铁芯选型、设计与生产的实用工程文章。
324 篇文章
Why an Approved 110% Excitation Point Can Be So Revealing
Suppose two cores agree near the reference po…
阅读全文Over-Fluxing Is a V/f and Magnetic-Circuit Question
Rated voltage does not establish rated flux w…
阅读全文Stacking Factor: The Area Error That Changes the Operating Point
A stacking-factor assumption enters the magne…
阅读全文Core Diameter and Effective Area Are Not Interchangeable
Which diameter is on the drawing: the physica…
阅读全文Limb Centre Distance: Small Errors, Different Assembly Consequences
Two centre-distance deviations of the same ma…
阅读全文Window Size Means Usable Winding Clearance, Not Just Two Dimensions
A winding can fit the nominal window and stil…
阅读全文Large-Core Dimensional Chains: Why Every Part Can Pass and the Assembly Still Miss
Every dimension on the inspection sheet is gr…
阅读全文Four Quality Decisions That Should Not Be Collapsed into One
A core can be cosmetically acceptable, dimens…
阅读全文Why a Visually Perfect Core Still Needs Magnetic Evaluation
Would a photograph of a core tell you which o…
阅读全文White Spots and Scratches: Diagnose the Surface Before Naming the Defect
A white spot on a GOES sheet is a location to…
阅读全文Insulation Coating Is a Measured Function, Not a Yes-or-No Feature
"Both sides coated" leaves the most useful co…
阅读全文未找到匹配文章，请换用更宽泛的关键词。