Dyn11 and Dyn1: Read Phase Displacement before Substitution
Dyn11 and Dyn1 are not interchangeable labels…
阅读全文技术资料库工程技术资料
技术资料
面向变压器铁芯选型、设计与生产的实用工程文章。
1,317 篇文章
Transformer Impedance in Procurement: Guaranteed Value, Tolerance and Test Basis
A procurement impedance requirement needs thr…
阅读全文Busbar Short-Circuit Upgrades after Transformer Replacement
Replacing a transformer can invalidate downst…
阅读全文Tap Position and Transformer Impedance: Which Values Enter the Study?
Transformer impedance can vary with tap posit…
阅读全文Transformer Through-Fault Duty: Electromagnetic Forces versus Thermal Duty
Through-fault withstand has two linked but di…
阅读全文Source Impedance plus Transformer Impedance: A Complete Fault-Current Boundary
Transformer impedance alone defines only one …
阅读全文Three-Winding Pairwise Impedances: What Each Test Represents
A three-winding transformer has three pairwis…
阅读全文Impedance Tolerance in Parallel Transformer Studies
Parallel-load sharing is sensitive not only t…
阅读全文Transformer X/R Ratio: Why Fault Studies Need More than Percent Z
Percent impedance gives magnitude; X/R descri…
阅读全文Selecting Transformer Impedance: Balance Fault Current and Voltage Regulation
Lower transformer impedance reduces internal …
阅读全文Transformer Percentage Impedance: What the Base Values Mean
Percentage impedance is a per-unit quantity o…
阅读全文Reading Transformer Nameplate Ratings without Mixing Test Conditions
A transformer nameplate is a set of condition…
阅读全文未找到匹配文章，请换用更宽泛的关键词。
工程技术笔记
工程笔记与完整技术文章相互补充，便于快速查阅。