Dyn11 and Dyn1: Read Phase Displacement before Substitution
Dyn11 and Dyn1 are not interchangeable labels…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Transformer Impedance in Procurement: Guaranteed Value, Tolerance and Test Basis
A procurement impedance requirement needs thr…
원문 읽기Busbar Short-Circuit Upgrades after Transformer Replacement
Replacing a transformer can invalidate downst…
원문 읽기Tap Position and Transformer Impedance: Which Values Enter the Study?
Transformer impedance can vary with tap posit…
원문 읽기Transformer Through-Fault Duty: Electromagnetic Forces versus Thermal Duty
Through-fault withstand has two linked but di…
원문 읽기Source Impedance plus Transformer Impedance: A Complete Fault-Current Boundary
Transformer impedance alone defines only one …
원문 읽기Three-Winding Pairwise Impedances: What Each Test Represents
A three-winding transformer has three pairwis…
원문 읽기Impedance Tolerance in Parallel Transformer Studies
Parallel-load sharing is sensitive not only t…
원문 읽기Transformer X/R Ratio: Why Fault Studies Need More than Percent Z
Percent impedance gives magnitude; X/R descri…
원문 읽기Selecting Transformer Impedance: Balance Fault Current and Voltage Regulation
Lower transformer impedance reduces internal …
원문 읽기Transformer Percentage Impedance: What the Base Values Mean
Percentage impedance is a per-unit quantity o…
원문 읽기Reading Transformer Nameplate Ratings without Mixing Test Conditions
A transformer nameplate is a set of condition…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.