Vacuum Leak-Up: Separate Leaks from Outgassing
Pressure rise in a loaded chamber includes ma…
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Condenser Lag in Water-Removal Curves
A drop in collection rate can occur before th…
원문 읽기Repeated Drying: Preserve the Material Exposure History
A successful water-removal result does not er…
원문 읽기Spacer Drying Shrinkage and Axial Preload
Drying can change the spacer stack geometry, …
원문 읽기Vacuum Drying: Why Insulation Temperature Can Fall
Evaporation can consume heat during a drying …
원문 읽기Low-Frequency Drying Heat: Winding and Core Constraints
Internal electrical heating needs a circuit-s…
원문 읽기Residual Drying Solvent Before Oil Filling
A low visible residue or normal oil appearanc…
원문 읽기Condensation Heating in Vapour-Phase Drying
A cold metal surface and a thick insulation i…
원문 읽기Vapour-Phase Drying: Close the Solvent and Water Balance
Total recovered liquid does not tell you how …
원문 읽기Radiation and Coil Shadowing in a Vacuum Oven
A coil facing the heated wall and a coil hidd…
원문 읽기Why Thick Pressboard Dries from the Surface Inward
A dry pressboard surface does not establish a…
원문 읽기Factory Cooler Test and Installed-System Acceptance
A factory cooler test verifies one defined ex…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.