Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
Baca artikel lengkapPUSTAKAReferensi rekayasa
Pustaka Teknis
Artikel rekayasa praktis untuk pemilihan, desain, dan produksi inti transformator.
1,317 artikel
A No-Load Loss Failure at Transformer FAT
FAT has found excessive no-load loss. The inv…
Baca artikel lengkapWhat 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
Baca artikel lengkapHigh Measured Loss: Start with the Measurement Boundary
Before ordering a different CRGO grade, repea…
Baca artikel lengkapNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
Baca artikel lengkapThe Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
Baca artikel lengkapLamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
Baca artikel lengkapWhat Cutting Changes Near a GOES Edge
A sheared edge has two stories: the burr you …
Baca artikel lengkapMore Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
Baca artikel lengkapOne Joint-Gap Reading Cannot Represent a Whole Stack
The inspection sheet shows one joint-gap valu…
Baca artikel lengkapThe Smallest Step-Lap Gap Is Not the Whole Objective
"Close the gap as much as possible" is not a …
Baca artikel lengkapA Factory Pass Does Not Freeze the Core for Transport
A magnetic test report records a condition at…
Baca artikel lengkapTidak ada artikel yang cocok. Coba kata kunci yang lebih umum.
Catatan referensi rekayasa
Catatan referensi singkat melengkapi artikel lengkap yang diterbitkan.