Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
記事の原文を読む資料技術情報
技術資料
変圧器用鉄心の選定、設計、製造に役立つ技術記事をまとめています。
1,317 件の記事
A No-Load Loss Failure at Transformer FAT
FAT has found excessive no-load loss. The inv…
記事の原文を読むWhat 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
記事の原文を読むHigh Measured Loss: Start with the Measurement Boundary
Before ordering a different CRGO grade, repea…
記事の原文を読むNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
記事の原文を読むThe Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
記事の原文を読むLamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
記事の原文を読むWhat Cutting Changes Near a GOES Edge
A sheared edge has two stories: the burr you …
記事の原文を読むMore Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
記事の原文を読むOne Joint-Gap Reading Cannot Represent a Whole Stack
The inspection sheet shows one joint-gap valu…
記事の原文を読むThe Smallest Step-Lap Gap Is Not the Whole Objective
"Close the gap as much as possible" is not a …
記事の原文を読むA Factory Pass Does Not Freeze the Core for Transport
A magnetic test report records a condition at…
記事の原文を読む該当する記事が見つかりませんでした。より一般的なキーワードで検索してください。
技術ノート
公開記事を補足する短い技術ノートです。