Vacuum Leak-Up: Separate Leaks from Outgassing
Pressure rise in a loaded chamber includes ma…
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
1,317 articles
Condenser Lag in Water-Removal Curves
A drop in collection rate can occur before th…
Lire l’article completRepeated Drying: Preserve the Material Exposure History
A successful water-removal result does not er…
Lire l’article completSpacer Drying Shrinkage and Axial Preload
Drying can change the spacer stack geometry, …
Lire l’article completVacuum Drying: Why Insulation Temperature Can Fall
Evaporation can consume heat during a drying …
Lire l’article completLow-Frequency Drying Heat: Winding and Core Constraints
Internal electrical heating needs a circuit-s…
Lire l’article completResidual Drying Solvent Before Oil Filling
A low visible residue or normal oil appearanc…
Lire l’article completCondensation Heating in Vapour-Phase Drying
A cold metal surface and a thick insulation i…
Lire l’article completVapour-Phase Drying: Close the Solvent and Water Balance
Total recovered liquid does not tell you how …
Lire l’article completRadiation and Coil Shadowing in a Vacuum Oven
A coil facing the heated wall and a coil hidd…
Lire l’article completWhy Thick Pressboard Dries from the Surface Inward
A dry pressboard surface does not establish a…
Lire l’article completFactory Cooler Test and Installed-System Acceptance
A factory cooler test verifies one defined ex…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.
Fiches de référence techniques
Des fiches de référence synthétiques complètent les articles publiés dans leur intégralité.