Dyn11 and Dyn1: Read Phase Displacement before Substitution
Dyn11 and Dyn1 are not interchangeable labels…
Ler artigo completoBIBLIOTECARecursos de engenharia
Biblioteca técnica
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
1,317 artigos
Transformer Impedance in Procurement: Guaranteed Value, Tolerance and Test Basis
A procurement impedance requirement needs thr…
Ler artigo completoBusbar Short-Circuit Upgrades after Transformer Replacement
Replacing a transformer can invalidate downst…
Ler artigo completoTap Position and Transformer Impedance: Which Values Enter the Study?
Transformer impedance can vary with tap posit…
Ler artigo completoTransformer Through-Fault Duty: Electromagnetic Forces versus Thermal Duty
Through-fault withstand has two linked but di…
Ler artigo completoSource Impedance plus Transformer Impedance: A Complete Fault-Current Boundary
Transformer impedance alone defines only one …
Ler artigo completoThree-Winding Pairwise Impedances: What Each Test Represents
A three-winding transformer has three pairwis…
Ler artigo completoImpedance Tolerance in Parallel Transformer Studies
Parallel-load sharing is sensitive not only t…
Ler artigo completoTransformer X/R Ratio: Why Fault Studies Need More than Percent Z
Percent impedance gives magnitude; X/R descri…
Ler artigo completoSelecting Transformer Impedance: Balance Fault Current and Voltage Regulation
Lower transformer impedance reduces internal …
Ler artigo completoTransformer Percentage Impedance: What the Base Values Mean
Percentage impedance is a per-unit quantity o…
Ler artigo completoReading Transformer Nameplate Ratings without Mixing Test Conditions
A transformer nameplate is a set of condition…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.
Notas técnicas de referência
Notas de consulta rápida complementam os artigos publicados na íntegra.