Vacuum Leak-Up: Separate Leaks from Outgassing
Pressure rise in a loaded chamber includes ma…
Ler artigo completoBIBLIOTECARecursos de engenharia
Biblioteca técnica
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
1,317 artigos
Condenser Lag in Water-Removal Curves
A drop in collection rate can occur before th…
Ler artigo completoRepeated Drying: Preserve the Material Exposure History
A successful water-removal result does not er…
Ler artigo completoSpacer Drying Shrinkage and Axial Preload
Drying can change the spacer stack geometry, …
Ler artigo completoVacuum Drying: Why Insulation Temperature Can Fall
Evaporation can consume heat during a drying …
Ler artigo completoLow-Frequency Drying Heat: Winding and Core Constraints
Internal electrical heating needs a circuit-s…
Ler artigo completoResidual Drying Solvent Before Oil Filling
A low visible residue or normal oil appearanc…
Ler artigo completoCondensation Heating in Vapour-Phase Drying
A cold metal surface and a thick insulation i…
Ler artigo completoVapour-Phase Drying: Close the Solvent and Water Balance
Total recovered liquid does not tell you how …
Ler artigo completoRadiation and Coil Shadowing in a Vacuum Oven
A coil facing the heated wall and a coil hidd…
Ler artigo completoWhy Thick Pressboard Dries from the Surface Inward
A dry pressboard surface does not establish a…
Ler artigo completoFactory Cooler Test and Installed-System Acceptance
A factory cooler test verifies one defined ex…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.
Notas técnicas de referência
Notas de consulta rápida complementam os artigos publicados na íntegra.