A Passing Final Test Does Not Establish a Stable Process
Every core in the shipment can pass while the…
記事の原文を読む資料技術情報
切断・積層・組立
変圧器用鉄心の製造における切断、積層、組立の技術記事をまとめています。
100 件の記事
What In-House Core Testing Actually Changes
The value of a core test station is measured …
記事の原文を読むA Lower Scrap Rate Does Not Automatically Mean a Better Core Factory
Before comparing scrap percentages, ask what …
記事の原文を読むMaterial Utilization Cannot Override the Magnetic Direction
The nesting software may find a better fit by…
記事の原文を読むMixed Laminations: The Risk Is Not Always Visible in the Stack
A packet can look correct and still contain t…
記事の原文を読むMaterial Traceability Must Survive the Split and the Merge
The coil number is known. Can you still ident…
記事の原文を読むShort Core Lead Time: Which Clock Has Actually Been Reduced?
Which part of the promised lead time is short…
記事の原文を読むWhich Core Tolerances Are Worth Tightening?
Tolerance should follow sensitivity. A critic…
記事の原文を読むCore Cost Reduction: Remove Waste Before Moving the Design Limit
A lower core purchase price is not necessaril…
記事の原文を読むWhy an Excellent First Sample Can Be a Poor Production Predictor
The first sample may have passed through a pr…
記事の原文を読むRepeatability: What the Best Test Result Cannot Tell You
Ask for the sequence, not the record result. …
記事の原文を読むA Passing Core Test Does Not Qualify the Winding Interface
The core passes its magnetic test. The windin…
記事の原文を読む該当する記事が見つかりませんでした。より一般的なキーワードで検索してください。
技術ノート
公開記事を補足する短い技術ノートです。