Tap Changers under Reverse Power: Control Philosophy Questions
Reverse power can invalidate an OLTC control …
阅读全文技术资料库工程技术资料
技术资料
面向变压器铁芯选型、设计与生产的实用工程文章。
1,317 篇文章
Tap-Changer Deadband and Delay: Avoiding Control Hunting
Tap-changer deadband and time delay prevent u…
阅读全文Line-Drop Compensation: Data a Transformer Control System Needs
Line-drop compensation estimates remote-bus v…
阅读全文Where Should Transformer Voltage Be Regulated?
The regulated voltage point may be at the tra…
阅读全文Transformer Tap Range and Tap Step: Two Different Specification Fields
Tap range and tap step describe different par…
阅读全文Off-Circuit versus On-Load Tap Changers: Specify the Operating Need
A de-energized tap changer changes ratio only…
阅读全文Transformer Regulation at Leading and Lagging Power Factor
Transformer voltage regulation changes with l…
阅读全文Transformer Parallel-Operation Studies: Minimum Data Deliverables
A parallel-operation study is reusable only i…
阅读全文Adding a Third Transformer to an Existing Parallel Bank
Adding a third transformer to an existing par…
阅读全文Protection Selectivity with Parallel Transformer Infeeds
Parallel transformer infeeds change both faul…
阅读全文Transformer Parallel Operation during Maintenance Transfers
Short-duration paralleling during a maintenan…
阅读全文Load-Tap-Changer Control in Parallel Transformer Banks
Parallel OLTC control is a control-system pro…
阅读全文未找到匹配文章，请换用更宽泛的关键词。
工程技术笔记
工程笔记与完整技术文章相互补充，便于快速查阅。