Tap Changers under Reverse Power: Control Philosophy Questions
Reverse power can invalidate an OLTC control …
원문 읽기자료엔지니어링 자료
기술 자료실
변압기 철심의 선정, 설계, 제작에 참고할 수 있는 기술 글을 모았습니다.
1,317 건
Tap-Changer Deadband and Delay: Avoiding Control Hunting
Tap-changer deadband and time delay prevent u…
원문 읽기Line-Drop Compensation: Data a Transformer Control System Needs
Line-drop compensation estimates remote-bus v…
원문 읽기Where Should Transformer Voltage Be Regulated?
The regulated voltage point may be at the tra…
원문 읽기Transformer Tap Range and Tap Step: Two Different Specification Fields
Tap range and tap step describe different par…
원문 읽기Off-Circuit versus On-Load Tap Changers: Specify the Operating Need
A de-energized tap changer changes ratio only…
원문 읽기Transformer Regulation at Leading and Lagging Power Factor
Transformer voltage regulation changes with l…
원문 읽기Transformer Parallel-Operation Studies: Minimum Data Deliverables
A parallel-operation study is reusable only i…
원문 읽기Adding a Third Transformer to an Existing Parallel Bank
Adding a third transformer to an existing par…
원문 읽기Protection Selectivity with Parallel Transformer Infeeds
Parallel transformer infeeds change both faul…
원문 읽기Transformer Parallel Operation during Maintenance Transfers
Short-duration paralleling during a maintenan…
원문 읽기Load-Tap-Changer Control in Parallel Transformer Banks
Parallel OLTC control is a control-system pro…
원문 읽기검색 조건에 맞는 글이 없습니다. 더 일반적인 키워드로 다시 검색해 주세요.
기술 노트
공개 기술 글의 내용을 보완하는 짧은 기술 노트입니다.