Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
Baca artikel lengkapPUSTAKAReferensi rekayasa
Desain inti & kinerja magnetik
Artikel rekayasa praktis untuk pemilihan, desain, dan produksi inti transformator.
65 artikel
What 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
Baca artikel lengkapNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
Baca artikel lengkapThe Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
Baca artikel lengkapLamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
Baca artikel lengkapMore Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
Baca artikel lengkapThe Smallest Step-Lap Gap Is Not the Whole Objective
"Close the gap as much as possible" is not a …
Baca artikel lengkapClamping Pressure Is Not a More-Is-Better Setting
The torque wrench clicks. The core is still n…
Baca artikel lengkapMechanical Stress After the Core Is Built
The chemistry has not changed. The magnetic r…
Baca artikel lengkapTransformer Core Drawings and Manufacturing Recipe Control
Look at two cores made to the same drawing. T…
Baca artikel lengkapTransformer Core Building Factor: Define the Baseline First
What does a building factor of 1.15 actually …
Baca artikel lengkapTwo domain-refined GOES sheets at 1.7 T, 50 Hz:
Compare 0.20 mm and 0.23 mm domain-refined GO…
Baca artikel lengkapTidak ada artikel yang cocok. Coba kata kunci yang lebih umum.
Catatan referensi rekayasa
Catatan referensi singkat melengkapi artikel lengkap yang diterbitkan.