Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
Ler artigo completoBIBLIOTECARecursos de engenharia
Projeto do núcleo e desempenho magnético
Artigos de engenharia aplicados à seleção, ao projeto e à produção de núcleos de transformadores.
65 artigos
What 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
Ler artigo completoNormal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
Ler artigo completoThe Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
Ler artigo completoLamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
Ler artigo completoMore Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
Ler artigo completoThe Smallest Step-Lap Gap Is Not the Whole Objective
"Close the gap as much as possible" is not a …
Ler artigo completoClamping Pressure Is Not a More-Is-Better Setting
The torque wrench clicks. The core is still n…
Ler artigo completoMechanical Stress After the Core Is Built
The chemistry has not changed. The magnetic r…
Ler artigo completoTransformer Core Drawings and Manufacturing Recipe Control
Look at two cores made to the same drawing. T…
Ler artigo completoTransformer Core Building Factor: Define the Baseline First
What does a building factor of 1.15 actually …
Ler artigo completoTwo domain-refined GOES sheets at 1.7 T, 50 Hz:
Compare 0.20 mm and 0.23 mm domain-refined GO…
Ler artigo completoNenhum artigo encontrado. Tente uma palavra-chave mais abrangente.