Tap Changers under Reverse Power: Control Philosophy Questions
Reverse power can invalidate an OLTC control …
Lire l’article completBIBLIOTHÈQUERessources techniques
Bibliothèque technique
Articles techniques pratiques sur la sélection, la conception et la fabrication des noyaux de transformateurs.
1,317 articles
Tap-Changer Deadband and Delay: Avoiding Control Hunting
Tap-changer deadband and time delay prevent u…
Lire l’article completLine-Drop Compensation: Data a Transformer Control System Needs
Line-drop compensation estimates remote-bus v…
Lire l’article completWhere Should Transformer Voltage Be Regulated?
The regulated voltage point may be at the tra…
Lire l’article completTransformer Tap Range and Tap Step: Two Different Specification Fields
Tap range and tap step describe different par…
Lire l’article completOff-Circuit versus On-Load Tap Changers: Specify the Operating Need
A de-energized tap changer changes ratio only…
Lire l’article completTransformer Regulation at Leading and Lagging Power Factor
Transformer voltage regulation changes with l…
Lire l’article completTransformer Parallel-Operation Studies: Minimum Data Deliverables
A parallel-operation study is reusable only i…
Lire l’article completAdding a Third Transformer to an Existing Parallel Bank
Adding a third transformer to an existing par…
Lire l’article completProtection Selectivity with Parallel Transformer Infeeds
Parallel transformer infeeds change both faul…
Lire l’article completTransformer Parallel Operation during Maintenance Transfers
Short-duration paralleling during a maintenan…
Lire l’article completLoad-Tap-Changer Control in Parallel Transformer Banks
Parallel OLTC control is a control-system pro…
Lire l’article completAucun article correspondant. Essayez un mot-clé plus général.
Fiches de référence techniques
Des fiches de référence synthétiques complètent les articles publiés dans leur intégralité.