Chenfan Electric
Русский
Отправить чертёж
Вернуться к инженерным видео

Библиотека технических видео

Lamination Cleanliness and Interlaminar Short-Circuit Risk

Длительность 00:53 · 1080 × 1920

Техническое описание

Debris between core laminations can affect insulation, sheet spacing and pressure distribution. This video follows metallic chips and non-metallic contamination through packet building and stacking. It covers separation from cutting and grinding, clean handling, surface inspection and investigation of low core-to-clamp insulation readings.

Скачать субтитры

Текстовая расшифровка
A clean-looking core can still hide something between its sheets. At the cutting line, remove chips and fines before forming packets. A conductive chip can bridge the coating. Contacts that close a loop linked by changing magnetic flux can allow current to circulate across sheets. Non-metallic debris can also hold sheets apart and make pressure uneven. Separate stacking from cutting and grinding. Wear clean gloves, keep tools and packaging off the stack, and inspect the surface before adding the next packet. After assembly, check core-to-clamp insulation resistance. If the reading is low, investigate the cause. The finished core's outside appearance is not a substitute for a clean build.

Запрос по проекту

Связаться с нашей командой ↗
Chenfan Electric

Прямое согласование

Обсудим ваш проект.

Обсудим ваш чертёж, требования к материалу или проект.

Отправить чертёж