Chenfan Electric
中文
发送图纸
返回工程视频中心

工程技术视频库

Lamination Cleanliness and Interlaminar Short-Circuit Risk

时长 00:53 · 1920 × 1080

技术简介

Debris between core laminations can affect insulation, sheet spacing and pressure distribution. This video follows metallic chips and non-metallic contamination through packet building and stacking. It covers separation from cutting and grinding, clean handling, surface inspection and investigation of low core-to-clamp insulation readings.

下载字幕

文字稿
A clean-looking core can still hide something between its sheets. At the cutting line, remove chips and fines before forming packets. A conductive chip can bridge the coating. Contacts that close a loop linked by changing magnetic flux can allow current to circulate across sheets. Non-metallic debris can also hold sheets apart and make pressure uneven. Separate stacking from cutting and grinding. Wear clean gloves, keep tools and packaging off the stack, and inspect the surface before adding the next packet. After assembly, check core-to-clamp insulation resistance. If the reading is low, investigate the cause. The finished core's outside appearance is not a substitute for a clean build.

项目询盘

联系团队 ↗
Chenfan Electric

直接沟通

开始沟通。

图纸、材料需求,或待讨论的项目。

发送图纸