WEBVTT 00:00:00.452 --> 00:00:02.260 A clean-looking core can still hide 00:00:02.275 --> 00:00:03.754 something between its sheets. 00:00:04.595 --> 00:00:05.579 At the cutting line, 00:00:05.780 --> 00:00:07.718 remove chips and fines before forming 00:00:07.733 --> 00:00:08.366 packets. 00:00:09.204 --> 00:00:10.908 A conductive chip can bridge the 00:00:10.923 --> 00:00:11.426 coating. 00:00:12.290 --> 00:00:13.942 Contacts that close a loop linked 00:00:13.957 --> 00:00:15.882 by changing magnetic flux can allow 00:00:15.897 --> 00:00:17.884 current to circulate across sheets. 00:00:18.735 --> 00:00:20.960 Non-metallic debris can also hold sheets 00:00:20.975 --> 00:00:22.663 apart and make pressure uneven. 00:00:23.527 --> 00:00:25.309 Separate stacking from cutting and 00:00:25.324 --> 00:00:25.905 grinding. 00:00:26.769 --> 00:00:27.715 Wear clean gloves, 00:00:27.837 --> 00:00:29.437 keep tools and packaging off the 00:00:29.452 --> 00:00:31.351 stack, and inspect the surface before 00:00:31.366 --> 00:00:32.506 adding the next packet. 00:00:33.371 --> 00:00:35.335 After assembly, check core-to-clamp 00:00:35.350 --> 00:00:36.803 insulation resistance. 00:00:37.655 --> 00:00:38.887 If the reading is low, 00:00:39.022 --> 00:00:40.488 investigate the cause. 00:00:41.353 --> 00:00:43.226 The finished core's outside appearance is 00:00:43.241 --> 00:00:44.723 not a substitute for a clean 00:00:44.738 --> 00:00:45.189 build.