Thin-Gauge GOES: The Handling Decision Behind the Loss Decision
The thinner sheet reaches the stacking statio…
阅读全文技术资料库工程技术资料
技术资料
面向变压器铁芯选型、设计与生产的实用工程文章。
324 篇文章
Domain-Refined GOES: Protecting the Benefit After Delivery
A stress-relief operation can remove somethin…
阅读全文When Two Loss Results Are Not Comparable
Supplier A reports fewer watts than Supplier …
阅读全文Average W/kg Can Hide a Local Problem
A core can have an acceptable average loss wh…
阅读全文A No-Load Loss Failure at Transformer FAT
FAT has found excessive no-load loss. The inv…
阅读全文What 90%, 100% and 110% Excitation Can Reveal
One excitation point gives you a result. Seve…
阅读全文High Measured Loss: Start with the Measurement Boundary
Before ordering a different CRGO grade, repea…
阅读全文Normal Loss, High Exciting Current: Where to Start
The watts are acceptable. The exciting curren…
阅读全文The Magnetic Consequences of a Punched Hole
A hole is a missing piece of the magnetic pat…
阅读全文Lamination Alignment Is a Magnetic and Assembly Variable
An offset lamination is not just an untidy ed…
阅读全文What Cutting Changes Near a GOES Edge
A sheared edge has two stories: the burr you …
阅读全文More Step-Lap Steps Do Not Automatically Make a Better Core
Adding steps changes a joint design. It does …
阅读全文未找到匹配文章，请换用更宽泛的关键词。
工程技术笔记
工程笔记与完整技术文章相互补充，便于快速查阅。