WEBVTT

00:00:00.452 --> 00:00:02.091
The slit edge is already shaping

00:00:02.106 --> 00:00:03.601
the finished core before cut to

00:00:03.616 --> 00:00:04.588
length begins.

00:00:05.441 --> 00:00:07.132
Wrong strip width changes the limb

00:00:07.147 --> 00:00:08.913
profile and net steel section.

00:00:09.777 --> 00:00:11.377
Camber curves the strip in its

00:00:11.392 --> 00:00:12.077
own plane.

00:00:12.928 --> 00:00:13.587
At a joint,

00:00:13.774 --> 00:00:14.840
that can leave a gap on

00:00:14.855 --> 00:00:16.572
one side and excess overlap on

00:00:16.587 --> 00:00:17.142
the other.

00:00:18.006 --> 00:00:19.889
Edge waves stop sheets lying flat;

00:00:20.077 --> 00:00:21.933
forcing them flat can add stress.

00:00:22.785 --> 00:00:24.580
Long slit edges also need burr

00:00:24.595 --> 00:00:25.241
control.

00:00:26.092 --> 00:00:27.874
Match knife clearance and overlap to

00:00:27.889 --> 00:00:28.991
the grade and thickness.

00:00:29.842 --> 00:00:31.517
Measure width at the coil head,

00:00:31.613 --> 00:00:32.558
middle and tail.

00:00:33.410 --> 00:00:35.670
Measure camber over a defined span.

00:00:36.522 --> 00:00:38.525
Use actual burr measurements to trigger

00:00:38.540 --> 00:00:40.648
blade maintenance, and control tension

00:00:40.663 --> 00:00:41.556
through recoiling.

00:00:42.407 --> 00:00:44.202
Trace assembly errors back to the

00:00:44.217 --> 00:00:44.967
slit strip.