WEBVTT

1
00:00:00.453 --> 00:00:01.484
At a core corner,

2
00:00:01.623 --> 00:00:03.962
magnetic flux turns
and transfers between

3
00:00:03.977 --> 00:00:04.875
laminations.

4
00:00:05.749 --> 00:00:07.715
A conventional lap
alternates joint

5
00:00:07.730 --> 00:00:09.732
positions between
two locations.

6
00:00:10.589 --> 00:00:12.622
Flux detours around
each gap through

7
00:00:12.637 --> 00:00:14.670
neighbouring sheets,
concentrating the

8
00:00:14.685 --> 00:00:15.357
transfer.

9
00:00:16.241 --> 00:00:18.114
Now spread the
joint positions over

10
00:00:18.129 --> 00:00:20.136
five steps, an
example within the

11
00:00:20.151 --> 00:00:21.753
article's typical range.

12
00:00:22.624 --> 00:00:24.338
The transfer is
shared across more

13
00:00:24.353 --> 00:00:25.942
layers and a wider area.

14
00:00:26.813 --> 00:00:28.673
That is the purpose
of multi-step

15
00:00:28.688 --> 00:00:29.147
lap.

16
00:00:30.018 --> 00:00:31.585
The drawing only
works when the

17
00:00:31.600 --> 00:00:32.697
build preserves it.

18
00:00:33.568 --> 00:00:35.388
Length and angle
errors change the

19
00:00:35.403 --> 00:00:36.075
overlap.

20
00:00:36.932 --> 00:00:38.788
Burrs can hold
the joint open.

21
00:00:39.672 --> 00:00:41.093
When the top yoke is removed

22
00:00:41.108 --> 00:00:42.285
for winding assembly,

23
00:00:42.531 --> 00:00:44.240
rebuild the same
lacing pattern.

24
00:00:45.124 --> 00:00:47.356
Joint geometry,
edge condition and

25
00:00:47.371 --> 00:00:49.599
reassembly all belong
in the inspection.