WEBVTT

1
00:00:00.453 --> 00:00:01.484
At a core corner,

2
00:00:01.623 --> 00:00:04.875
magnetic flux turns and transfers between laminations.

3
00:00:05.749 --> 00:00:08.686
A conventional lap alternates joint positions between

4
00:00:08.701 --> 00:00:09.732
two locations.

5
00:00:10.589 --> 00:00:13.114
Flux detours around each gap through neighbouring

6
00:00:13.129 --> 00:00:15.357
sheets, concentrating the transfer.

7
00:00:16.241 --> 00:00:18.447
Now spread the joint positions over five

8
00:00:18.462 --> 00:00:21.199
steps, an example within the article's typical

9
00:00:21.214 --> 00:00:21.753
range.

10
00:00:22.624 --> 00:00:24.763
The transfer is shared across more layers

11
00:00:24.778 --> 00:00:25.942
and a wider area.

12
00:00:26.813 --> 00:00:29.147
That is the purpose of multi-step lap.

13
00:00:30.018 --> 00:00:31.878
The drawing only works when the build

14
00:00:31.893 --> 00:00:32.697
preserves it.

15
00:00:33.568 --> 00:00:36.075
Length and angle errors change the overlap.

16
00:00:36.932 --> 00:00:38.788
Burrs can hold the joint open.

17
00:00:39.672 --> 00:00:41.292
When the top yoke is removed for

18
00:00:41.307 --> 00:00:44.240
winding assembly, rebuild the same lacing pattern.

19
00:00:45.124 --> 00:00:48.261
Joint geometry, edge condition and reassembly all

20
00:00:48.276 --> 00:00:49.599
belong in the inspection.